When you want to drill and cut efficiently it requires the correct kind of drill or blade. Matching blades and drills with materials makes this even more important. This makes sense for both contractors and DIY hobbyists alike.
In the past, drill bits have been made from steel. However, the type of steel is important. Soft, low carbon steel bits can be used when drilling wood. The high carbon steel bits can be used for metal and wood but will lose their edge if they overheat.
High Speed Steel (HHS) bits are great for use in drilling a wide range of materials. This includes hardwood and metals. These materials can be drilled at higher speeds than carbon steel bits. If you have to drill in higher temperatures the HHS variants like cobalt steel alloys are typically a good choice.
Tungsten carbide and other carbide tips are extremely hard. These drill bits can tear through many tough materials and still retain their edge. However, they also are quite brittle and cost a lot.
Bits that are coated in Black Oxide, Titanium nitride, Titanium aluminum nitride and Zirconium nitride can extend life of the bit and provide much greater heat resistance.
One of the hardest most durable drill bit coatings is diamond powder. This coating is long lasting and can drill through the toughest materials with ease.
Diamond drill and hole cutters generate lots of heat. So, you must be careful not allow it to build up. If you do, this can damage finishes and materials. So, some of the diamond drills come with a water-cooled wet core. This wet core supplies a continuous stream of coolant for drilling materials like flint and limestone aggregate concrete, reinforced concrete, and the other hard building materials.
Standard dry core diamond drills are more suitable to medium and soft bricks, cinder blocks, and other abrasive concrete products. The tougher and super fast dry core drills take most building materials with ease. These building materials include clay products, semi-engineering bricks, and limestone aggregate concrete.
Even though there are many types of saw on the article, in this article we’ll discuss circular saws.
If you need a good reliable wood saw consider a tungsten carbide tipped or HSS blade. If you need a saw for more demanding purposes consider more advanced blades or you will have a tool that can’t cut through the material. The blade will get blunt or simply overheat. Diamond tipping enables manufacturers to provide blades matched to the requirements of cutting some of the hardest materials.
When you cut ceramic and stone tiles for walls and floors seek out tile cutting blades first and foremost. These are the kind used in homes and in commercial environments. These types of blades bite into hard surfaces and provide clean, well-finished cuts. To cut into concrete or asphalt you must get another specialized floor saw blade.
If you must cut into building materials like clay products, engineering bricks, or concrete a segmented universal/hard diamond blade with cooling is a great choice. It disperses some of the heat. If you need to cut natural stone a high-quality super fast blade is usually the best choice.
When you have to cut less difficult materials like bricks, slabs, concrete pavers, roof tiles, and most other concrete products pick up a standard general-purpose diamond blade.
No matter what you drill or cut it’s best to use the best kind of blade or drill. This makes the job easier and gives a cleaner finish.
If you use the more portable cordless power tools (including of course drills), then you know that from time to time you need to replace the batteries. Laptopsforless.com has a great selection of batteries for almost every power tool on the market. So if you’re looking for a rechargeable power tool battery for Makita, Milwaukee Tools, Ryboi, Bosch, Craftsman, DeWalt or of course Black & Decker, then check ou† LaptopsForLess replacement batteries for power tools.